Vent-Axia Air Minder Plus Installationshandbuch

ABC WHOLE HOUSE HEAT RECOVERY UNIT Installation, Connection and set up Instructions READ INSTRUCTIONS

10 G:6 Adjusting the Medium Airflow Rates Press the “ V ” “Λ ” and `set’ Keys for more than 5 seconds until the display changes to the screen opp

11IF DIFFERENT RUNNING TIMES ARE REQUIRED, REFER TO THE USER HAND BOOK. G:7 Adjusting the Boost Airflow Rates Press the “ V ” “Λ ” and `set’ Keys

12 H EXTERNAL SENSOR CONNECTIONS Select the required External Sensors. Ambient Response Humidity Sensor (56 35 50) Ecotronic Humidity Sensor (56 3

13Head Office: Fleming Way, Crawley, West Sussex RH10 9YXTel: 01293 526062 Fax: 01293 551188Internet site at: www.vent-axia.com VENT-AXIA SALES C

2450mm450mm1500mmMinimumClearanceInstallation and Wiring Instructions for Air Minder Plus Heat Recovery Unit (HRU).

3 AIRMINDER PLUS has been designed and packaged to be easily installed by one person. For ease of handling and installation the Air Minder Plus HRU i

4Spigot Locking Clips (At the base of the spigots)Unit Locking StrapsFilter AFilter B Spigot Locking Clips (At the base of the spigots)B. ASSEMBLY.

5C MOUNTING Note: Ensure that horizontal units are installed with a 5° fall towards the condensate drain point. TYPICAL MOUNTING 1. The H

6Electrcal Control Box(Colour: Yellow)Intake from Outside(Colour: Green)SUPPLY(Warm Fresh Air) to the Dwelling(Colour: Red)from the DwellingEXTRACT(W

7 INSTALLING THE CONTROLLER 1. Insert a small flat bladed screwdriver into the small slot at the base of the controller, push the release catch in

8 Connections. FANS. 1. Route the blower unit cable in the Cable Retaining Groove on the Fan Blower and around the outside groo

90I0:0SetCockSunDAY (Flashing)HOURMINUTES>>:000SETISetCockeTu>CTue>eSt:00SETIock11>>SETedMTupeed:15Se11ium>Se tSET>0 0: 0Cloc